|
Callout |
Component Name |
|---|---|
|
1 |
Side Window Defroster Outlet Grille (Qty: 2) Procedure
Use a flat bladed plastic trim tool to aid in the removal of the grille assemblies from the instrument panel. |
Refrigerant Recovery and Recharging
Special ToolsBody Panel Paint Protector Replacement (VGC)
The paint protective film and vehicle surface temperature should be 13?€“32?°C
(55?€“90?°F) for best results.
Automatic car washes should be avoided for at least 24?€‰hours after the
paint protective film application.
Wipe the vehicle surface with isopropyl alcohol or fl ...
Sunroof Motor/Actuator Initialization/Teach Process
Note: If the sunroof motor is new, cycle the sunroof seven?€‰(7) times
to teach the motor/actuator initialization process.
Perform the initialization/teach procedure on a reinstall motor or a new
motor. Ensure the electrical harness on the headliner is connected to the sunroof
mot ...
Intake Manifold Disassemble (1.6L LDE)
Remove the intake manifold absolute pressure sensor bolt.
Remove the manifold absolute pressure sensor (1) from the intake manifold (2).
Remove the intake manifold mount (2) from the intake manifold (1).
Remove the throttle body seal (1). ...