|
Callout |
Component Name |
|---|---|
|
1 |
Side Window Defroster Outlet Grille (Qty:?€‰2) Procedure
Use a flat bladed plastic trim tool to aid in the removal of the grille assemblies from the instrument panel. |
Defoggers
Rear Window Defogger Description and OperationRoof Front Header Panel Replacement
Removal Procedure
Warning: Refer to Approved Equipment for Collision Repair
Warning.
Note: The roof front header panel is made of Ultra High Strength
Steel and should be replaced only at factory joints. Repairing or sectioning
of this part is not recomme ...
Tire and Wheel Balancing (Road Force Variation (RFV))
ALL wheel/tire assemblies must have a RFV within spec before being mounted
on vehicle.
Important: If a wheel/tire assembly is not within the RFV specification
after match mounting, the tire must be returned to the tire manufacturer.
DO NOT install tire/wheel assembly on a vehicl ...
Control Solenoid Valve and Transmission Control Module Assembly Replacement
Removal Procedure
Remove the transmission control valve body cover.
Refer to Control Valve Body Cover Replacement.
Disconnect the output speed sensor electrical connector (2).
Disconnect the shift position switch electrical connector (3).
Disconn ...