Chevrolet Sonic Repair Manual: SIR Deployed Inflator Modules Are Hot Warning

Warning:

After deployment, the metal surfaces of the SIR component may be very hot. To help avoid a fire or personal injury:

• Allow sufficient time for cooling before touching any metal surface of the SIR component.
• Do not place the deployed SIR component near any flammable objects.

Secondary

...

SIR Disabling and Enabling

SIR component location affects how a vehicle should be serviced. There are parts of the SIR system installed in various locations around a vehicle. To find the location of the SIR components refer ...

Other materials:

Brake Drum Refinishing
Special Tools CH-41013 Rotor Resurfacing Kit CH-42450-A Wheel Hub Resurfacing Kit For equivalent regional tools, refer to Special Tools. Warning: Refer to Brake Dust Warning. The brake drums do not require refinishing as part of routine brake system service. Do not refinis ...

Body Control Module Programming and Setup
Note: DO NOT program a control module unless directed to by a service procedure or a service bulletin. If the control module is not properly configured with the correct calibration software, the control module will not control all of the vehicle features properly. Ensure th ...

Drive Range, First Gear Engine Braking (Gen 1)
When the gear selector lever is moved to the Drive (D) range from the Neutral (N) position, the transmission will provide engine braking. In this operating range, the normally-low 1234 pressure control solenoid 5 is commanded ON and, in the engine braking mode, the following changes occur with ...