Warning:
When carrying an undeployed inflator module:
When storing an undeployed inflator module:
Failure to observe these guidelines may result in personal injury.
Load Compartment (Hatchback)Roof Panel Joint Finish Molding Replacement
Roof Panel Joint Finish Molding Replacement
Callout
Component Name
Caution: Refer to Exterior Trim Emblem Removal Caution.
Preliminary Procedures
Begin at the rear edge of the roof panel joint finish molding an ...
Park Brake Hardware Inspection
Warning: Refer to Brake Dust Warning.
Visually inspect the park brake lever (1) and the lever pivot pin (2) for
the following conditions:
The lever being bent or broken at any point – particularly at the cable
attachment
A seized or binding condition ...
Secondary Air Injection Pump Removal
Disconnect the secondary air injection pump pipe (3). Refer to Plastic Collar
Quick Connect Fitting Service.
Remove the secondary air injection pump nut (2) and the 2 secondary air
injection pump bolts (4).
Remove the secondary air injection pump (1 ...