Chevrolet Sonic Repair Manual: SIR Seatbelt Pretensioner Handling Warning

Warning:

When carrying an undeployed inflatable restraint seat belt retractor pretensioner:

• Do not carry the seat belt pretensioner by the seat belt webbing or pigtail connector, if equipped.
• Carry the seat belt pretensioner by the housing, keeping hands and fingers away from the seat belt webbing.
• Make sure the opening, from which the seat belt webbing extends, faces downward and the seat belt webbing hangs freely.

Failure to observe these guidelines may result in personal injury.

Replacing Safety Belt System Parts after a Crash

Warning: A crash can damage the safety belt system in the vehicle. A damaged safety belt system may not properly protect the person using it, resulting in serious injury or even death in a cr ...

Seat Belt Latch Stop Installation

Seat Belt Latch Stop Installation Callout Component Name Preliminary Procedure Locate the hole in the seat belt webbing where the o ...

Other materials:

Lock Cylinder Coding - Ignition
The ignition lock cylinder uses 8 key cut positions, 1–8. The ignition cylinder tumblers (3) are located on alternate sides of the cylinder (5). They are not snap-in and are not self-retaining. It follows the key code with the first tumbler being the first depth of the ...

Ignition Coil Installation
Special Tools EN-6009 Remover and Installer Ignition Module For equivalent regional tools, refer to Special Tools. Install the ignition coil (1) and remove EN-6009 remover and installer  (2). Caution: Refer to Fastener Caution. Install the 2  ...

Synchronizers Cleaning and Inspection
Note: When servicing the synchronizers, retain them in the order that they are removed. Mark the parts to ensure the correct position for inspection and assembly. Clean all the synchronizer parts in a suitable cleaning solvent and air dry all the parts. Inspect the 1 ...