|
Callout |
Component Name |
|---|---|
Preliminary Procedure
|
|
|
1 |
Spark Plugs Caution: Refer to Fastener Caution.
25 Y (18 lb ft) Special Tools
EN-194-E Spark Plug Remover For equivalent regional tools, refer to Special Tools. |
Spark Plug InspectionLiftgate Window Replacement
Special Tools
BO-24402-A Glass Sealant Remover (Cold Knife)
BO-39032 Stationary Glass Removal Tool
Use an adhesive that is approved by GM
For equivalent regional tools, refer to Special Tools
Removal Procedure
Warning: Refer to Cracked Window Warning.
Note ...
Front Disc Brake Mounting and Hardware Inspection
Warning: Refer to Brake Dust Warning.
Inspect the fluid level in the brake master cylinder reservoir.
If the brake fluid level is midway between the maximum-full point and the
minimum allowable level then no brake fluid needs to be removed from the reservoir
before proceed ...
Crankshaft Position System Variation Learn
Note: The crankshaft position sensor system variation learn procedure
is required when the following service procedures have been performed, regardless
of whether DTC P0315 is set:
Engine replacement
Engine control module (ECM) replacement
Crankshaft damper replacement
...