|
Illustration |
Tool Number/ Description |
|---|---|
|
BO-24402-A J-24402-A Glass Sealant Cold Knife Remover |
![]() |
BO-39032 J-39032 Stationary Glass Removal Tool |
Remote Keyless Entry (RKE) System Operation
Stationary Window DescriptionHow to Identify Plastic Parts
saepvcsae
Plastic parts can be identified by the SAE code, which is usually found on the
rear of the part, and/or by the characteristics of the plastic. Knowing the type
of plastic aids in selecting the proper repair materials and in selecting the proper
repair procedure.
Look for the SAE ...
Charge Air Cooler Inlet Air Hose Replacement
Removal Procedure
Disconnect the battery negative cable. Refer to Battery Negative Cable
Disconnection and Connection.
Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement.
Loosen the charge air cooler inlet air pipe clamp (1) at the ...
Main Shaft Assemble (Gen 1)
Special Tools
3-0207944 Main Shaft Tapered Bearing Insert Tool
For equivalent regional tools, refer to Special Tools.
Install the 4th gear bearing assembly (1).
Note: The 3rd gear blocking ring lugs must be aligned with the
3rd/4th gear synchronizer assembly groov ...