|
Illustration |
Tool Number/ Description |
|---|---|
|
EL?€‰38826 J?€‰38826 KM?€‰799-3 SIR Deployment Harness |
|
EL?€‰39401-B J?€‰39401-B SIR Deployment Fixture |
Seat Adjustment
Steering Wheel Airbag Coil ReplacementEngine Heater
The engine heater can provide easier starting and better fuel economy during
engine warm-up in cold weather conditions at or below −18°C (0°F). Vehicles with
an engine heater should be plugged in at least four hours before starting.
1. Turn off the engine.
2. Open the hood and unwrap ...
Engine Oil Cooler Housing Removal
Remove the 2 engine oil cooler pipe bolts (1).
Remove the oil cooler pipe (2).
h.\.\,.\\..,v:..//
Remove the 5 engine oil cooler housing bolts (2).
Remove the engine oil cooler housing (1).
Remove the engine oil cooler inlet pi ...
Drive Belt Installation
Special Tools
EN-955 Locking Pins
EN-48488 Holding Wrench
For equivalent regional tools, refer to Special Tools.
Note: Ensure that the drive belt tensioner is held with EN-955?E
locking pin.
Install the drive belt.
Move the drive belt tensioner clockwise until EN- ...