|
Illustration |
Tool Number/Description |
|---|---|
|
CH 21177 J 21177-A Drum to Brake Shoe Clearance Gauge |
|
CH 41013 J 41013 Rotor Resurfacing Kit |
|
CH 42450-A J 42450-A Wheel Hub Resurfacing Kit |
|
CH 8001 J 8001 Dial Indicator Set |
Rear Wheel Bearing and Hub Replacement (Drum Brake)
Brake Shoe Replacement (J93, J94)Recommended Fuel
Use regular unleaded gasoline with a posted octane rating of 87 or higher. If
the octane rating is less than 87, an audible knocking noise may be heard. If this
occurs, use a gasoline rated at 87 octane or higher as soon as possible. If heavy
knocking is heard when using gasoline with a higher ...
Brake Fluid Level Indicator Switch Replacement
Removal Procedure
Disconnect the brake fluid level indicator switch
electrical connector.
Using a small, flat-bladed tool, lift the locking
tab on the underside of the brake fluid level indicator switch (1) and remove
the switch.
Inspect the maste ...
Engine Flywheel Installation
Special Tools
EN-652 Flywheel Holder
EN-45059 Torque Angle Sensor Kit
For equivalent regional tools, refer to Special Tools.
Clean the thread in the crankshaft.
Install the crankshaft position reluctor ring (1).
Install the flywheel (2).
Install the EN-6 ...