Chevrolet Sonic Repair Manual: Special Tools

Replacement Wheels Description

Replace the wheel if any of the following conditions exist: The wheel exhibits excessive runout. The wheel is bent. The wheel is cracked. The wheel is severely rusted. The wheel is severe ...

Tire Dismounting and Mounting

Caution: Use a tire changing machine in order to dismount tires. Do not use hand tools or tire irons alone in order to remove the tire from the wheel. Damage to the tire beads or the wheel ri ...

Other materials:

Tire and Wheel Assembly Runout Measurement - Off Vehicle
Raise and support the vehicle. Mark the location of the wheels to the wheel studs and mark the specific vehicle position on each tire and wheel – LF, LR, RF, RR. Remove the tire and wheel assemblies from the vehicle. Closely inspect each tire for proper and even bead seating. If an ...

Battery Current Sensor Replacement
Removal Procedure Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection. Disconnect the battery current sensor from the body harness connector. Unclip the battery current sensor from the battery tray. Remove the battery ...

Drive Belt Installation
Special Tools EN-955 Locking Pins EN-48488 Holding Wrench For equivalent regional tools, refer to Special Tools. Note: Ensure that the drive belt tensioner is held with EN-955?E locking pin. Install the drive belt. Move the drive belt tensioner clockwise until EN- ...