Chevrolet Sonic Repair Manual: Starter Installation
- Install the starter (4).
- Install the lower starter bolt stud (3) and if equipped the washer.
- Install the upper starter bolt (2) and if equipped the washer (1).
- Tighten the starter bolt and starter bolt stud to 25 Y (18 lb ft)
.
Caution:
Refer to Fastener Caution.
Starting System Description and Operation
The starter motors are non-repairable starter motors. They have pole pieces that
are arranged around the armature. Both solenoid windings are energized. The pull-in
winding circuit is completed to ...
Starter Removal
Remove the upper starter bolt (2) and if equipped the washer (1).
Remove the lower starter bolt stud (3) and if equipped the washer.
Remove the starter (4).
...
Other materials:
Air Conditioning Evaporator Hose Assembly Replacement
Air Conditioning Evaporator Hose Assembly Replacement
Callout
Component Name
1
Air Conditioning Evaporator Hose Assembly Nut.
Caution: Refer to Fastener Caution.
Tighten
22 Y (16 lb f ...
Crankshaft Front Oil Seal Installation
Special Tools
EN-6351 Mounting Sleeves
For equivalent regional tools, refer to Special Tools.
Clean the sealing surfaces.
Slide the EN-6351 sleeves (2) protective sleeve onto the crankshaft
journal.
Slide the crankshaft front oil seal (1) over the protective sleev ...
Engine Oil Cooler Coolant Inlet Hose Replacement (LUV)
Engine Oil Cooler Coolant Inlet Hose Replacement
Callout
Component Name
Preliminary Procedure
Open the hood.
Drain the cooling system. Refer to Cooling System Draining and Filling.
1
Oil Coo ...
0.0089