Chevrolet Sonic Owner's Manual: Starting and Operating

Certification Label

Label Example A vehicle-specific Certification label is attached to the vehicle's center pillar (B-pillar). The label tells the gross weight capacity of the vehicle, called the Gross Vehicl ...

New Vehicle Break-In

Caution The vehicle does not need an elaborate break-in. But it will perform better in the long run if you follow these guidelines: . Do not drive at any one constant speed, fast or slow, for t ...

Other materials:

Selecting the Alert Timing
The Collision Alert control is on the steering wheel. Press COLLISION ALERT to set the alert timing to far, medium, near or off. The first button press shows the current control setting on the DIC. Additional button presses will change this setting. The chosen setting will remain until it is ...

Drive Belt Tensioner Installation
Install the drive belt tensioner (1). Install the upper drive belt tensioner bolt (2). Install the lower drive belt tensioner bolt (3). Caution: Refer to Fastener Caution. Tighten the lower drive belt tensioner bolt (M8) to 22 Y (16&# ...

Front Wheel Drive Shaft Seal Replacement - Left Side
Special Tools DT-446 Installer Drift DT-7004 Slide Hammer DT-23129 Universal Seal Remover For equivalent regional tools, refer to Special Tools. Removal Procedure Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle. Remove the front suspension s ...