Most stationary windows, specifically windshields, are retained to the body with adhesive which adheres the window to the body, increasing structural integrity. The reinstallation of the windows with adhesive requires complete replacement of the adhesive bead, and is known as the full cut method. All stationary windows must use a adhesive systems which meet GM Specification GMW-15672.
Interior Lighting
Dome Lamps
The dome lamp controls are in the headliner above the rear seats.
: Press to turn the lamps off, even
when a door is open.
: When the button is returned to
the middle position, the lamps turn on automatically when a door is opened.
: Press to turn on the dome lamps.
Reading ...
Airbag Steering Wheel Module Replacement
Removal Procedure
Warning: Refer to SIR Inflator Module Handling and Storage
Warning.
Warning: Refer to SIR Warning.
Disable the SIR system. Refer to SIR Disabling and Enabling.
Rotate the steering wheel 180?€‰degrees.
Using a bl ...
Brake Caliper Inspection
Warning: Refer to Brake Dust Warning.
Inspect the brake caliper housing (1) for cracks, excess wear, and/or damage.
If any of these conditions are present, the brake caliper requires replacement.
Inspect the caliper piston dust boot seal (2) for cracks, tears, ...