Chevrolet Sonic Repair Manual: Steering Wheel and Column Description and Operation
The steering wheel and column have the following 4 primary functions:
- Vehicle steering
- Vehicle security
- Driver convenience
- Driver safety
- Vehicle Steering
-
The steering wheel is the first link between the driver and the vehicle. The steering wheel is fastened to a steering shaft within the steering column. At the lower end of the steering column, the intermediate steering shaft connects the steering column to the steering gear.
- Vehicle Security
-
The steering wheel and column may have theft deterrent components mounted and designed into the steering column.
- Driver Convenience
-
The steering wheel and column may have driver controls attached for convenience and comfort.
- Driver Safety
-
The steering column has safety features to protect the driver.
- Energy-Absorbing Steering Column
-
The energy-absorbing steering column compresses in the event of a front-end collision, which reduces the chance of injury to the driver. The energy-absorbing feature, collapsible steering shaft, and break away mounting features help reduce the injury in the event of an accident.
Steering Wheel Straight and Column Locked Caution
Caution: With wheels of the vehicle facing straight ahead, secure
the steering wheel utilizing steering column anti-rotation pin, steering column
lock, or a strap to prevent rotation. Locking ...
Turn Signal Multifunction Switch Replacement
..
Turn Signal Multifunction Switch Replacement
Callout
Component Name
Preliminary Procedure
Remove the upper trim cover and the ...
Other materials:
Connection Settings
Select and the following may display:
Bluetooth Settings
Change Ringtone
Ringtone Volume
Bluetooth Settings
Select this feature to:
Connect, disconnect, or delete a device
Change or set a Personal Identification Number (PIN)
Turn on or off the Bluetooth connection
Check the dev ...
Tire Pressure Indicator Sensor Replacement
Removal Procedure
Raise the vehicle on a suitable support. Refer to
Lifting and Jacking the Vehicle.
Remove the tire/wheel assembly from the vehicle. Refer
to Tire and Wheel Removal and Installation.
Dismount the tire from the rim. Refer to
Tire Dismounting and Moun ...
Engine Front Cover Gasket Installation
Clean the sealing surfaces and remove all remains of old sealing compound
material.
Note: The thickness of the sealing bead should be 2 mm (0.0787 in).
Apply sealing compound to the shown areas (1) and (2). Refer to Adhesives,
Fluids ...
0.0101