|
Callout |
Component Name |
|---|---|
|
Preliminary Procedure
Remove the steering wheel inflatable restraint module. Refer to Airbag Steering Wheel Module Replacement. |
|
|
1 |
Steering Wheel Horn Contact Spring Retainer Bolt (Qty:?€‰3) Caution: Refer to Fastener Caution.
5.5?€‰Y(49?€‰lb?€‰in) |
|
2 |
Steering Wheel Horn Contact Assembly Procedure
Disconnect the electrical connectors. |
Horns System Description and Operation
LightingFabric/Carpet/Suede
Start by vacuuming the surface using a soft brush attachment. If a rotating brush
attachment is being used during vacuuming, only use it on the floor carpet. Before
cleaning, gently remove as much of the soil as possible using one of the following
techniques:
Gently blot liquids with a pap ...
Brake Pedal Position Sensor Replacement
Removal Procedure
Remove the instrument panel lower trim pad cover. Refer to Instrument
Panel Lower Trim Pad Cover Replacement.
Disconnect the brake pedal position sensor electrical connector.
Remove the brake pedal position sensor bolt?€‰(1).
Remove t ...
Hood Rear Seal Replacement
Hood Rear Seal Replacement
Callout
Component Name
1
Hood Rear Seal
Procedure
Clean the area where the seal will be mounted. Use a suitable solvent
with a mixture of 50?€‰percent isopropyl alcohol and 50?â ...