Chevrolet Sonic Repair Manual: Steering Wheel Replacement

Chevrolet Sonic Repair Manual / Chassis / Steering / Steering Wheel and Column / Steering Wheel Replacement

Steering Wheel Replacement
Callout	Component Name
Preliminary Procedure Remove the inflatable restraint steering wheel module. Refer to Airbag Steering Wheel Module Replacement. Use paint in order to place match marks on the steering wheel and on the steering column shaft.
1	Steering Wheel Bolt Caution: Refer to Fastener Caution. Procedure Clean thread of the bolt. Apply NEW locking compound to the thread. Refer to Adhesives, Fluids, Lubricants, and Sealers. Tighten 30 Y (22 lb ft)
2	Steering Wheel Procedure Disconnect all electrical connectors as necessary. Loosen the steering wheel bolt until 2 to 3 threads are left engaged. Wiggle the steering wheel until the steering wheel disengages completely. Remove the steering wheel bolt. Remove the steering wheel. Copy the match marks from the old steering wheel to the new steering wheel. Transfer any parts as necessary.

Steering Wheel Horn Contact Replacement

Steering Wheel Horn Contact Replacement Callout Component Name Preliminary Procedure Remove the steering wheel inflatable restr ...

Steering Wheel Straight and Column Locked Caution

Caution: With wheels of the vehicle facing straight ahead, secure the steering wheel utilizing steering column anti-rotation pin, steering column lock, or a strap to prevent rotation. Locking ...

Other materials:

Lap-Shoulder Belt
All seating positions in the vehicle have a lap-shoulder belt. The following instructions explain how to wear a lap-shoulder belt properly. 1. Adjust the seat, if the seat is adjustable, so you can sit up straight. To see how, see “Seats” in the Index. 2. Pick up the latch plate and pull ...

Fuel Tank Filler Door Replacement
Fuel Tank Filler Door Replacement Callout Component Name 1 Fuel Tank Filler Door Procedure Position the fuel tank filler door to the full open position. Using light outward sliding pressure on the filler door, ...

Front Floor Console Cover Replacement (Manual Transmission)
Removal Procedure Use a flat bladed plastic trim tool in order to release the retainers securing the console cover?€‰(1) to the console assembly. Reach under the console cover assembly?€‰(1) and release the retainer tabs securing the transmission shif ...

0.0074