Chevrolet Sonic Repair Manual: Steering Wheel Straight and Column Locked Caution

Caution:

With wheels of the vehicle facing straight ahead, secure the steering wheel utilizing steering column anti-rotation pin, steering column lock, or a strap to prevent rotation. Locking of the steering column will prevent damage and a possible malfunction of the SIR system. The steering wheel must be secured in position before disconnecting the following components:

• The steering column
• The intermediate shaft(s)
• The steering gear

After disconnecting these components, do not rotate the steering wheel or move the front tires and wheels. Failure to follow this procedure may cause the SIR coil assembly to become un-centered and cause possible damage to the SIR coil. If you think the SIR coil has became un-centered, refer to your specific SIR coil’s centering procedure to re-center SIR Coil.

Steering Wheel Replacement

Steering Wheel Replacement Callout Component Name Preliminary Procedure Remove the inflatable restraint steering wheel module. Refe ...

Steering Wheel and Column Description and Operation

The steering wheel and column have the following 4 primary functions: Vehicle steering Vehicle security Driver convenience Driver safety Vehicle Steering The steering whee ...

Other materials:

Safety Function Override
If the battery on the vehicle has been recharged or disconnected, or is not working, the windows will need to be reprogrammed for the express-up feature to work. Before reprogramming, replace or recharge the vehicle's battery. To program the driver window: 1. With the ignition in ACC/ ACCE ...

Use of Room Temperature Vulcanizing (RTV) and Anaerobic Sealant
Pipe Joint Compound Note: Three types of sealer are commonly used in engines. These are RTV sealer, anaerobic gasket eliminator sealer, and pipe joint compound. The correct sealer and amount must be used in the proper location to prevent oil leaks. DO NOT interchange the 3&# ...

K20 Engine Control Module: Programming and Setup
Special Tools EL-49642 SPS Programming Support Tool For equivalent regional tools, refer to Special Tools. Note: DO NOT program a control module unless directed to by a service procedure or a service bulletin. If the control module is not properly configured with the correct ...