Drivers are encouraged to set up XM channel favorites while the vehicle is not moving. Tune to favorite stations using the pushbuttons, favorites button, and steering wheel controls. See Defensive Driving.
A maximum of 36 stations can be programmed as favorites using the six pushbuttons positioned below the radio station frequency labels and by using the radio favorites page button (FAV button). Press the FAV button to go through up to six pages of favorites, each having six favorite stations available per page. Each page of favorites can contain any combination of AM, FM, or XM channels. To store an XM channel as a favorite:
1. Tune in the desired channel.
2. Press and release the FAV button to display the page where the channel is to be stored.
3. Press and hold one of the six numbered pushbuttons until a beep sounds. When the pushbutton is pressed and released, the channel that was set will return.
4. Repeat Steps 1−3 for each XM channel to be stored as a favorite.
To set up the number of favorites pages:
1. Press and hold FAV until the radio setup menu displays.
2. Select the desired number of favorites pages by pressing the pushbutton located below the displayed page numbers.
3. Press FAV to return to the original main radio screen showing the radio frequency tabs and to begin the process of programming favorites for the chosen number of numbered pages.
Finding a Channel
SiriusXM Radio MessagesRear Seat Center Shoulder Belt Replacement (Sedan)
Rear Seat Center Shoulder Belt Replacement
Callout
Component Name
Preliminary Procedures
Remove the rear seat cushion. Refer to Rear Seat Cushion Removal and
Installation.
1
Rear Seat Center Sho ...
Air Conditioning Compressor and Condenser Hose Replacement (LUV)
Removal Procedure
Recover the refrigerant. Refer to Refrigerant Recovery and Recharging.
Remove the drivetrain and front suspension frame skid plate if equipped.
Refer to Drivetrain and Front Suspension Frame Skid Plate Replacement.
Remove the front fascia assembly. Re ...
Turbocharger Cleaning and Inspection
Cleaning Procedure
Clean all sealing surfaces.
Clean all threads if necessary.
Inspection Procedure
Inspect the wastegate regulator mechanism (1) for functionality.
Inspect the turbine blades for damage or foreign material.
Inspect the t ...