Chevrolet Sonic Repair Manual: Sunroof Module Assembly Replacement

Chevrolet Sonic Repair Manual / Body / Roof - Fixed, Leisure / Moonroof/Sunroof / Sunroof Module Assembly Replacement

Sunroof Module Assembly Replacement
Callout	Component Name
Preliminary Procedures Remove the sunroof window. Refer to Sunroof Window Replacement. Remove the headliner. Refer to Headlining Trim Panel Replacement. Disconnect the front and rear sunroof drain hoses. Refer to Sunroof Housing Front Drain Hose Replacement and Sunroof Housing Rear Drain Hose Replacement.
1	Sunroof Module Bolts (Qty?€‰:9) Caution: Refer to Fastener Caution. Procedure With an assistant, lower and remove the sunroof module assembly from the vehicle. Place the sunroof assembly on a clean dry surface. Transfer all necessary components to the new module assembly. Tighten 9?€‰Y (80?€‰lb?€‰in)
2	Sunroof Module Procedure Secure the harness to the sunroof module. Adjust the sunroof window. Refer to Sunroof Window Height and Opening Fit Adjustment. Verify the proper operation of the sunroof before securing the headliner. Ensure the motor/actuator initialization/teach process has been done. Refer to Sunroof Motor/Actuator Initialization/Teach Process.

Sunroof Housing Rear Drain Hose Replacement

Sunroof Housing Rear Drain Hose Replacement Callout Component Name Preliminary Procedures It is only necessary to lower the headlin ...

Sunroof Window Height and Opening Fit Adjustment

Note: Correct adjustment cannot be achieved if the sunroof window is closed from vent position. Cycle the sunroof window from full open to closed position. ., Note: Do Not re ...

Other materials:

Seat Adjustment
Manual Seats To adjust a manual seat: Pull the handle at the front of the seat. Slide the seat to the desired position and release the handle. Try to move the seat back and forth to be sure it is locked in place. See Seat Adjustment. Seat Height Adjuster ...

Camshaft Sprocket Installation
Install the intake camshaft sprocket (3). Install the intake camshaft position sensor exciter wheel (2) and the intake camshaft sprocket bolt (1), but do not tighten yet. Install the exhaust camshaft sprocket. Note: Tightening of camshaft sprocket bolts will ...

Heated Oxygen Sensor Replacement - Sensor 1
Heated Oxygen Sensor Replacement - Sensor 1 Callout Component Name Warning: In order to avoid being burned, do not service the exhaust system while it is still hot. Service the system when it is cool. Prelimi ...

0.008