Chevrolet Sonic Repair Manual: Throttle Body Assembly Replacement
- Removal Procedure
-
- Disconnect the throttle body wiring harness connector.
- Remove the charge air cooler outlet air hose from the throttle body. Refer to Charge Air Cooler Outlet Air Hose Replacement.
- Remove the 4 throttle body fasteners (3).
- Remove the throttle body (2) along with the throttle body seal ring (1).
- Installation Procedure
-
- Install the throttle fasteners (2) along with a NEW throttle body seal ring (1).
- Install the 4 throttle body fastener (3) and tighten
to 8 Y (71 lb in)
.
- Install the charge air cooler outlet air hose to the throttle body. Refer to Charge Air Cooler Outlet Air Hose Replacement.
- Connect the throttle body wiring harness connector.
Caution:
Refer to Fastener Caution.
Throttle Body Assembly Removal
Remove the 4 throttle body bolts (2).
Remove the throttle body (1).
Remove the throttle body seal.
...
Throttle Body Heater Inlet Hose Replacement (LUW)
Throttle Body Heater Inlet Hose Replacement
Callout
Component Name
Preliminary Procedure
Remove the air cleaner outlet duct. Refer ...
Other materials:
Rear Side Door Window Replacement (Sedan)
Rear Side Door Window Replacement
Callout
Component Name
Warning: Refer to Glass and Sheet Metal Handling Warning.
Preliminary Procedures
Remove the rear side door trim panel. Refer to Rear Side Door Trim
...
Brake Pressure Modulator Valve Bracket Replacement
Removal Procedure
Remove the brake pressure modulator valve (BPMV) and bracket assembly.
Refer to Brake Pressure Modulator Valve Replacement.
Remove the BPMV bolts (1).
Remove the BPMV bracket.
Installation Procedure
Install the BPMV br ...
Wheel Drive Shaft Inner Joint Inspection
Inspection Procedure
Remove the front wheel drive shaft inner joint and boot. Refer to Front
Wheel Drive Shaft Replacement.
Remove the wheel drive shaft tripod bushing (1) from the tripod housing (3).
Remove the wheel drive shaft tripod housi ...
0.0155