|
Callout |
Component Name |
|---|---|
|
Preliminary Procedure
Drain the cooling system. Refer to Cooling System Draining and Filling. |
|
|
1 |
Throttle Body Heater Inlet Pipe Procedure
|
Throttle Body Heater Inlet Hose Replacement (LUW)
Throttle Body Heater Outlet Hose Replacement (LUW)Body Side Frame Rocker Reinforcement Replacement
Removal Procedure
Warning: Refer to Approved Equipment for Collision Repair
Warning.
Warning: Refer to Glass and Sheet Metal Handling Warning.
Note: The body side frame rocker reinforcement is made of
Ultra High Strength Dual Phase Steel and ...
Master Cylinder Reservoir Filling
Warning: Refer to Brake Fluid Irritant Warning.
Caution: Refer to Brake Fluid Effects on Paint and Electrical Components
Caution.
Visually inspect the brake fluid level through the brake master cylinder
reservoir.
If the brake fluid level is at or below the half-full point ...
Charge Air Cooler Outlet Air Hose Replacement
Removal Procedure
Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement.
Loosen the clamp (1) at the charge air cooler outlet pipe (2) to throttle
body (3).
Disconnect the intake air pressure and temperature sensor harness connect ...