|
Callout |
Component Name |
|---|---|
|
Preliminary Procedure
Drain the cooling system. Refer to Cooling System Draining and Filling. |
|
|
1 |
Engine Coolant Air Bleed Hose |
|
2 |
Throttle Body Heater Outlet Pipe Procedure
|
Throttle Body Heater Outlet Hose Replacement (LUW)
PowertrainSpecial Tools
Illustration
Tool Number/Description
CH-41013
J 41013
Rotor Resurfacing Kit
CH-42450-A
J 42450-A
Wheel Hub Resurfacing Kit
CH-45101
J ...
Tire and Wheel Balancing (Wheel Pilot Bore Greasing)
Beginning with MY 2011 vehicle, pilot bore grease should be applied.
To enable this, grease must be applied to the pilot bore to prevent the
wheel from seizing onto the hub.
Refer to Adhesives, Fluids, Lubricants, and Sealers for pilot bore lubricant
part number.
Do not use any pene ...
Crankshaft Balancer Removal
Special Tools
EN-652 Flywheel Holder
For equivalent regional tools, refer to Special Tools.
Install the EN-652 holder (1). Lock the flywheel (2) or the automatic
transmission flex plate via the starter ring gear.
Remove and DISCARD the crankshaft balancer bo ...