Chevrolet Sonic Repair Manual: Throttle Body Installation
- Install the throttle body (2) and a NEW throttle body seal ring (1).
- Install the 4 throttle body bolts (3) and tighten to 8 Y (71 lb in)
.
Caution:
Refer to Fastener Caution.
Throttle Body Assembly Removal
Remove the 4 throttle body bolts (2).
Remove the throttle body (1).
Remove the throttle body seal.
...
Throttle Body Removal
Remove the 4 throttle body bolts (3).
Remove the throttle body (2) and the throttle body seal ring (1).
...
Other materials:
Tire and Wheel Assembly-to-Hub/Axle Flange Match-Mounting
Note: After remounting a tire and wheel assembly to a hub/axle flange,
remeasure the tire and wheel assembly on-vehicle runout in order to verify that
the amount of runout has been reduced and brought to within tolerances.
Mark the location of the high spot on the tire and wheel asse ...
Vehicle Yaw Sensor Learn
The yaw sensor does not require calibration often. Calibration of the yaw rate
sensor might be required after certain service procedures are performed. Some of
these procedures are as follows:
Electronic brake control module (EBCM) replacement
Multi-axis acceleration sensor replacement
...
Radiator Replacement (LUV)
Removal Procedure
Remove the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct
Replacement.
Remove the front compartment front insulator cover. Refer to Front Compartment
Front Insulator Cover Replacement.
Remove the engine coolant fan shroud. Refer to Engine Coo ...
0.0058