Chevrolet Sonic manuals

Chevrolet Sonic Repair Manual: Thrust Washer and Bearing Cleaning and Inspection

Chevrolet Sonic Repair Manual / Body / Wipers, Washers / Washer Fluid System / Thrust Washer and Bearing Cleaning and Inspection



    Warning:

    Wear safety glasses to avoid injury when using compressed air or any cleaning solvent. Bodily injury may occur if fumes are inhaled or if skin is exposed to chemicals.

    Caution:

    Do not allow the bearings to spin. Turn them slowly by hand. Spinning the bearings may damage the race and the rollers.

  1. Mark or tag the bearings in order to ensure they are properly installed in the correct location.
  2. Clean all of the roller bearings, needle bearings, and ball bearings in a suitable solvent and air dry all the parts.
  3. Inspect the bearings and races for the following conditions:
  • Inspect the cage bearings for being bent or for having damaged cages.
  • Replace the bearings with any of the above conditions.
  • Replace mated bearing parts when only one part is damaged.
  • Inspect the thrust washers for scoring or wear.
  • Replace any faulty thrust washers.
  • Do not file surfaces which have been hardened and precision ground.
  • Rear Wiper/Washer System Description and Operation
    The rear window wiper motor is located inside the hatchback door and is directly connected to the rear window wiper. Ignition voltage is supplied to the rear wiper motor through the wiper switch. ...

    Windshield Washer Solvent Container Filler Tube Replacement
    Windshield Washer Solvent Container Filler Tube Replacement Callout Component Name Preliminary Procedure Open and support the hood ...

    Other materials:

    Front Opening Upper Cover Replacement
    Front Opening Upper Cover Replacement Callout Component Name 1 Radiator Opening Upper Cover Screw (Qty:?€‰10) Caution: Refer to Fastener Caution. 2 Radiator Opening Upper Cove ...

    Front Side Door Window Regulator Motor Replacement
    Front Side Door Window Regulator Motor Replacement Callout Component Name Warning: Refer to Glass and Sheet Metal Handling Warning. Preliminary Procedure Remove the front side door window regulator. Front Side ...

    Automatic Transmission Shift Lock Control Function Check
    Warning: When you are doing this inspection, the vehicle could move suddenly. If the vehicle moves, you or others could be injured. Before starting this check, be sure there is enough room around the vehicle. It should be parked on a level surface. Apply the parking brake. Be read ...

    © 2014-2024 Copyright www.csmans.com
     
    0.012