Chevrolet Sonic Owner's Manual: Tire Changing

Storing the Tire Sealant and Compressor Kit

The tire sealant and compressor kit is located in the rear storage area. 1. Lift the trim cover. 2. Remove the tire sealant canister (1) and the compressor (2). To store the tire sealant canister ...

Removing the Spare Tire and Tools

The compact spare tire and tools are located in the storage compartment in the rear of the vehicle. The jack and tools are stored below the spare tire. 1. Extension 2. Jack 3. Wheel Wrench 4. ...

Other materials:

Hood Primary and Secondary Latch Replacement
Hood Primary and Secondary Latch Replacement Callout Component Name 1 Hood Primary and Secondary Latch Bolt (Qty:?€‰2) Caution: Refer to Fastener Caution. Tighten 22?€‰Y (16?€‰lb?€‰ft) ...

Tire and Wheel Assembly Runout Measurement - On-Vehicle
Raise and support the vehicle. Closely inspect each tire for proper and even bead seating. If any of the tire beads were not properly or evenly seated, reseat the tire bead, then proceed to step 4. Refer to Tire and Wheel Removal and Installation. Wrap the circumferenc ...

Intake Camshaft Replacement
Removal Procedure Remove the camshaft intake and exhaust sprocket. Refer to Camshaft Intake and Exhaust Sprocket Replacement. Remove the camshaft bearing cap bolts in sequence shown. Ensure to remove the bolts one turn at a time until there is no spring tension p ...