Chevrolet Sonic Repair Manual: Tire Dismounting and Mounting (Bead Exercising)
- Most effective if done within 5 minutes of lube application.
- Tire exercising is required for all tires and should be done prior to balancing and checking for RFV.
- Lack of bead exercising will produce excessive RFV readings.
- Bead exercising can be performed using any tire mounting equipment equipped with upper and lower bead rollers.
- Bead exercising is to be performed on the inflated tire at placard pressure.
Tire Dismounting and Mounting
Caution: Use a tire changing machine in order to dismount tires. Do
not use hand tools or tire irons alone in order to remove the tire from the
wheel. Damage to the tire beads or the wheel ri ...
Tire Dismounting and Mounting (Lubricant)
Important:
Lubricant should be applied to form a thin, just visible layer,
on the bead foot and bead outer areas. There should not be any visible
clumps of lubricant.
Ne ...
Other materials:
Brake Pedal Position Sensor Replacement
Removal Procedure
Remove the instrument panel lower trim pad cover. Refer to Instrument
Panel Lower Trim Pad Cover Replacement.
Disconnect the brake pedal position sensor electrical connector.
Remove the brake pedal position sensor bolt?€‰(1).
Remove t ...
Instrument Cluster Upper Bezel Replacement
Instrument Cluster Upper Bezel Replacement
Callout
Component Name
1
Instrument Panel Cluster Upper Bezel
Procedures
Use a flat bladed plastic trim tool in order to disengage the retainers
securing the instrume ...
Engine Oil Cooler Inlet Pipe Replacement (LUW)
Removal Procedure
Drain the cooling system. Refer to Cooling System Draining and Filling.
Remove the exhaust manifold with catalytic converter. Refer to Exhaust
Manifold with Catalytic Converter Replacement.
Remove the engine oil cooler pipe bolts (1) an ...
0.0095