Note:
When servicing the tire pressure sensor always use a new Schrader® tire pressure monitoring (TPM) sensor and a new TORX screw during installation.
Caution:
Do not scratch or damage the clear coating on aluminum wheels with the tire changing equipment. Scratching the clear coating could cause the aluminum wheel to corrode and the clear coating to peel from the wheel.
Caution:
Refer to Fastener Caution.
Note:
.
Note:
Use an approved tire mounting lubricant. DO NOT use silicon or corrosive base compounds to lubricate the tire bead and the wheel rim. A corrosive type compound can cause tire or rim deterioration.
Note:
Snap Fit TPM sensors are shipped in the OFF mode. The sensor will exit its OFF state when the tire is inflated.
Secondary Air Injection Check Valve Replacement
Secondary Air Injection Check Valve Replacement
Callout
Component Name
1
Secondary Air Injection Outlet Pipe
Note: Squeeze the retainer on opposite sides to release.
2
Seconda ...
Definitions and Abbreviations
Throttle Positions
Engine Braking
A condition where the engine is used to slow the vehicle by manually
downshifting during a zero throttle coastdown.
Full Throttle Downshift
A quick apply of the accelerator pedal to its full travel, forcing a
downshift.
...
Automatic Transmission Flex Plate Removal
Special Tools
EN-652 Automatic Transmission Flex Plate Holder
For equivalent regional tools, refer to Special Tools.
Install the EN-652 holder (1) to hold the automatic
transmission flex plate (2).
Loosen the 6 automatic transmission flex plate bolts.
Re ...