Chevrolet Sonic manuals

Chevrolet Sonic Owner's Manual: Tire Pressure Light

For vehicles with the Tire Pressure Monitor System (TPMS), this light comes on


For vehicles with the Tire Pressure Monitor System (TPMS), this light comes on briefly when the engine is started. It provides information about tire pressures and the TPMS.

When the Light Is On Steady

This indicates that one or more of the tires are significantly underinflated.

Stop as soon as possible, and inflate the tires to the pressure value shown on the Tire and Loading Information label. See Tire Pressure.

When the Light Flashes First and Then Is On Steady

If the light flashes for about a minute and then stays on, there may be a problem with the TPMS. If the problem is not corrected, the light will come on at every ignition cycle. See Tire Pressure Monitor Operation.

Engine Coolant Temperature Warning Light
This light comes on briefly while starting the vehicle. If it does not, have the vehicle serviced by the dealer. If the system is working normally the indicator light goes off. Caution The engi ...

Engine Oil Pressure Light
Caution Lack of proper engine oil maintenance can damage the engine. Driving with the engine oil low can also damage the engine. The repairs would not be covered by the vehicle warranty. Check th ...

Other materials:

Rear Side Door Lock Cylinder Opening Cover Replacement
Rear Side Door Lock Cylinder Opening Cover Replacement Callout Component Name 1 Rear Side Door Lock Cylinder Opening Cover Procedure Remove the rear side door lock cylinder, Do Not remove the outside door han ...

Tire Inflation Description
When you inflate the tires to the recommended inflation pressures, the factory-installed wheels and tires are designed in order to handle loads to the tire's rated load capacity. Incorrect tire pressures, or under-inflated tires, can cause the following conditions: Vehicle handling co ...

Inspection/Maintenance (I/M) System DTC Table (LUW)
Inspection/Maintenance (I/M) System DTC Table System DTCs Required to Set System Status to YES If an inspection/maintenance system status indicator did NOT update to YES during the Inspection/Maintenance System Check, review ea ...

В© 2014-2026 Copyright www.csmans.com
 
0.0056