Chevrolet Sonic Repair Manual: Tire Pressure Monitor Description and Operation

Tire Pressure Indicator Sensor Replacement

Removal Procedure Raise the vehicle on a suitable support. Refer to Lifting and Jacking the Vehicle. Remove the tire/wheel assembly from the vehicle. Refer to Tire and Wheel R ...

Tire Pressure Monitor Operation

This vehicle may have a Tire Pressure Monitor System (TPMS). The TPMS is designed to warn the driver when a low tire pressure condition exists. TPMS sensors are mounted onto each tire and wheel as ...

Other materials:

Heated Seat Control Module Programming and Setup
The seat heating control module must be programmed with the proper calibration software. The module stores and utilizes this information however if it is not properly configured with the correct calibration software, the seat heating control module will not control all of the vehicle features ...

Gears Cleaning and Inspection (Gen 2)
Gears Warning: Wear safety glasses to avoid injury when using compressed air or any cleaning solvent. Bodily injury may occur if fumes are inhaled or if skin is exposed to chemicals. Clean the following gears in a suitable solvent and air dry all the p ...

Clutch Master Cylinder Replacement
Removal Procedure Remove the battery tray. Refer to Battery Tray Replacement. Remove as much brake fluid out of brake fluid reservoir as possible. Remove the clutch master cylinder reservoir hose (1) from the clutch master cylinder. Unclip th ...