Chevrolet Sonic Owner's Manual: Tires
Use a stiff brush with tire cleaner to clean the tires.
Caution
Using petroleum-based tire dressing products on the vehicle may damage the paint finish and/ or tires. When applying a tire dressing, always wipe off any overspray from all painted surfaces on the vehicle.
Weatherstrips
Apply Dielectric silicone grease on weatherstrips to make them last longer, seal
better, and not stick or squeak. Lubricate weatherstrips at least once a year. Hot,
dry climates may require more f ...
Wheels and Trim—Aluminum or Chrome
Use a soft, clean cloth with mild soap and water to clean the wheels. After rinsing
thoroughly with clean water, dry with a soft, clean towel. A wax may then be applied.
Caution
Chrome wheels and ...
Other materials:
Hydraulic Brake Component Operation Visual Inspection
Disc Brake
With the tire and wheel assemblies removed and the brake rotors retained
by wheel lug nuts, visually inspect the brake caliper piston dust boot (2)
sealing area to ensure that there are no brake fluid leaks.
If any evidence of a brake fluid leak is p ...
Tire and Wheel Balancing (Collet Cone Selection)
Important: Never use the hub cap bore to center the wheel onto
the balancer. The pilot bore (on the hub side of the wheel) is machined
to be concentric to very tight non - standard tolerances. The bottom cap
bore is not machined to this same degree of precision.
Accurate mac ...
Battery Disconnect Warning
Warning: Unless directed otherwise, the ignition and start switch
must be in the OFF or LOCK position, and all electrical loads must be OFF before
servicing any electrical component. Disconnect the negative battery cable to
prevent an electrical spark should a tool or equipment come in c ...
0.0054