|
Callout |
Component Name |
|---|---|
|
1 |
Torque Converter and Differential Housing Bolts M8 x 30 (Qty: 15) |
|
2 |
Torque Converter with Fluid Pump Housing Assembly |
|
3 |
Torque Converter Housing Gasket Note: Discard the seal. It is not reusable. |
|
4 |
Fluid Pump Seal Assembly Note: Discard the seal. It is not reusable. |
Torque Converter Housing with Fluid Pump Assembly Installation (6T40/45/50 Non
Hybrid)
Low and Reverse and 1-2-3-4 Clutch Housing Assemble (6T30)Stop and Turn Signal Lamp Bulb Replacement (Sedan)
Stop and Turn Signal Lamp Bulb Replacement
Callout
Component Name
Preliminary Procedure
Remove the tail lamp assembly. Refer to Tail Lamp Replacement.
1
Tail Lamp Socket
Procedure
Rotate the ...
Instrument Panel Center Molding Replacement (Without U58)
Instrument Panel Center Molding Replacement
Callout
Component Name
1
Instrument Panel Center Molding Assembly
Procedure
Use a flat bladed plastic trim tool in the shown locations, then
rotate the trim tool 90 ...
Transmission Assemble (Gen 2)
Special Tools
3-9506289 Universal Adapter
R-0007758 Holding Fixture
S-9407197 Differential Rotating Tool
S-9407198 Differential Bearing Race Wrench
For equivalent regional tools, refer to Special Tools.
Install the clutch and differential housing assembly (1)
onto ...