Chevrolet Sonic Repair Manual: Transmission Assembly

Automatic Transmission Flex Plate Removal

Special Tools EN-652 Automatic Transmission Flex Plate Holder For equivalent regional tools, refer to Special Tools. Install the EN-652 holder  (1) to hold the automatic trans ...

Shift Fork Cleaning and Inspection (Gen 1)

Warning: Wear safety glasses to avoid injury when using compressed air or any cleaning solvent. Bodily injury may occur if fumes are inhaled or if skin is exposed to chemicals. ...

Other materials:

Rear Brake Backing Plate Replacement
Removal Procedure Warning: Refer to Brake Dust Warning. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation. Remove the rear wheel speed sensor, if equipped ...

Instrument Panel Tie Bar Replacement
Removal Procedure Remove the Instrument panel assembly. Refer to Instrument Panel Assembly Replacement. Remove the steering column and wheel from the vehicle. Refer to Steering Column Replacement. Remove the air inlet grill panel. Refer to Air Inlet Grille Panel Replacem ...

Bushing and Mating Shaft Inspection
Note: Proper bushing and corresponding mating shaft inspection should be performed before replacing the bushing, shaft, and in some cases, the component which houses the bushing. Thoroughly clean and dry the bushing and shaft surfaces before inspecting for damage. Any of the followin ...