Chevrolet Sonic Repair Manual: Transmission Component and System Description
The mechanical components of the 6T30/40/45/50 are as follows:
- A torque converter with an electronically controlled capacity clutch (ECCC)
- Gear-type fluid pump assembly
- 1??? and low and reverse clutch housing assembly
- 4?? and 3? reverse clutch housing assembly
- 2? clutch assembly
- Low and reverse clutch (one way clutch) assembly
- Control valve body assembly
- Drive sprocket, driven sprocket and link assembly
- Front differential carrier assembly
- Input Carrier Assembly
- Reaction Carrier Assembly
- Output Carrier Assembly
The electrical components of the 6T30/40/45 are as follows:
- Output speed sensor assembly
- Input speed sensor assembly
- Manual shift shaft with internal mode switch
- Control solenoid valve assembly, which contains the following components:
- Transmission control module (TCM)
- 5 variable bleed line pressure control (PC) solenoids
- Transmission fluid pressure (TFP) switch assembly
- Torque converter clutch (TCC) pressure control solenoid
- shift solenoid
- Transmission fluid temperature sensor
For more information, refer to Electronic Component Description.
Transmission Assemble (Gen 2)
Special Tools
3-9506289 Universal Adapter
R-0007758 Holding Fixture
S-9407197 Differential Rotating Tool
S-9407198 Differential Bearing Race Wrench
For equivalent regional tools, refer ...
Transmission Disassemble (Gen 1)
Special Tools
3-9506289 Universal Adapter
R-0007758 Holding Fixture
S-9407198 Differential Bearing Race Wrench
For equivalent regional tools, refer to Special Tools.
Attach R-0 ...
Other materials:
Rear Seats
The vehicle's rear seats have adjustable head restraints in the outboard seating
positions.
The height of the head restraint can be adjusted. Pull the head restraint up
to raise it. Try to move the head restraint to make sure that it is locked in place.
To lower the head restraint, press ...
Shoulder Belt Replacement - Rear (Hatchback)
Shoulder Belt Replacement - Rear
Callout
Component Name
Preliminary Procedures
Remove the rear seat cushion. Refer to Rear Seat Cushion Removal
and Installation.
Remove the body lock pillar upper trim. Refer to Body Lock ...
Camshaft Position Actuator Solenoid Valve Replacement
Removal Procedure
Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement.
Disconnect the intake camshaft position actuator solenoid valve wiring
harness plug (3).
Disconnect the exhaust camshaft position actuator solenoid valve wiring ...
0.0081