Chevrolet Sonic manuals

Chevrolet Sonic Repair Manual: Transmission Control Replacement



Transmission Control Replacement

Callout

Component Name

Preliminary Procedures

  1. Remove the front floor console. Refer to Front Floor Console Replacement.
  2. Disconnect the range selector lever cable. Refer to Range Selector Lever Cable Replacement.
  3. Disconnect the transmission control electrical connectors.

1

Transmission Control Fastener (Qty: 4)

Caution:

Refer to Fastener Caution.

Tighten


9 Y (80 lb in)

2

Transmission Control

Transmission Case Cleaning and Inspection
Transmission Case Cleaning and Inspection Callout Component Name Caution: Do not use abrasive pads or bristle devices to clean ...

Transmission Fluid Drain and Fill
Draining Procedure Note: The fluid check bolt at the front of the transmission may not be opened. The transmission fluid drained out during the pre-delivery inspection ...

Other materials:

Compass
The vehicle may have a compass display in the Driver Information Center (DIC). The compass receives its heading and other information from the Global Positioning System (GPS) antenna, StabiliTrak, and vehicle speed information. Avoid covering the GPS antenna, located on the roof, for long perio ...

Park - Engine Running (Gen 1)
When the gear selector lever is in the Park (P) position, fluid is drawn into the pump through the transmission fluid filter assembly. Line pressure is then directed to the following valves: Fluid Pressure Directed in Preparation for a Shift Manual Valve Mechanically controlled ...

Main Shaft Assemble (Gen 2)
Special Tools 3-0207944 Main Shaft Tapered Bearing Insert Tool For equivalent regional tools, refer to Special Tools. Install the 4th gear bearing assembly (1). in!i.l.i-if Note: The 3rd gear blocking ring lugs must be aligned with the 3rd/4th gear synchronizer ass ...

В© 2014-2026 Copyright www.csmans.com
 
0.0062