Chevrolet Sonic Repair Manual: Transmission Disassemble (Gen 1)
Special Tools
- 3-9506289 Universal Adapter
- R-0007758 Holding Fixture
- S-9407198 Differential Bearing Race Wrench
For equivalent regional tools, refer to Special Tools.
- Attach R-0007758 holding fixture (2) to the transmission.
- Attach R-0007758 holding fixture (2) with transmission to the 3-9506289 Universal Adapter (1).
- Remove the clutch release bearing (1).
- Remove the clutch fork shaft retaining bolt (2).
- Remove the clutch fork shaft (1).
- Remove the transmission control lever housing bolts (1).
- Remove the control lever housing (2) and gasket (3).
- Remove the transmission cover bolts (3).
- Remove the transmission cover (2) and gasket (1).
- Remove the back up lamp switch (1).
- Remove the transmission case bolts (3).
- Remove the transmission case (2) and gasket (1).
- Remove the case magnet (4), may stay with case.
- Remove the reverse idler gear washer (5), may stay on the reverse idler gear shaft.
- Mark the differential bearing adjuster and case (1) before removal.
- Remove the differential bearing adjuster lock bolt (1).
- Remove the differential bearing adjuster lock (2).
- Using S-9407198 differential bearing race wrench remove the front differential bearing adjuster (1).
- Remove the front differential bearing retainer O-ring seal (2).
- Remove the front differential carrier cover bolts (1).
- Remove the differential carrier cover (2) and gasket (3).
- Remove the front differential carrier (1).
Transmission Control Replacement
Removal Procedure
Remove the floor console. Refer to
Front Floor Console Replacement.
Lift both cable adjustment retainers (1), one for
each cable, to release the s ...
Transmission Disassemble (Gen 2)
Special Tools
3-9506289 Universal Adapter
R-0007758 Holding Fixture
S-9407198 Differential Bearing Race Wrench
For equivalent regional tools, refer to Special Tools.
Attach R-0 ...
Other materials:
Oil Flow Check Valve Replacement
Oil Flow Check Valve Replacement
Callout
Component Name
Preliminary Procedure
Remove the generator. Refer to Generator Replacement.
1
Oil Flow Check Valve Bore Plug
Caution: Refer to Fastene ...
Inspection/Maintenance Complete System Set Procedure
Diagnostic Instructions
Perform the Diagnostic System Check - Vehicle
prior to using this diagnostic procedure.
Review Strategy Based Diagnosis for an
overview of the diagnostic approach.
Diagnostic Procedure Instructions provides
an overview of each diagnostic cat ...
3-5-Reverse and 4-5-6 Clutch Fluid Seal Ring Replacement (Gen 1)
3-5-Reverse and 4-5-6 Clutch Fluid Seal Ring Replacement
Callout
Component Name
Special Tools
DT-46620 Seal Installer
For equivalent regional tools, refer to Special
Tools.
1
3? Reverse and ...
0.0087