Chevrolet Sonic Repair Manual: Transmission Disassemble (Gen 2)
Special Tools
- 3-9506289 Universal Adapter
- R-0007758 Holding Fixture
- S-9407198 Differential Bearing Race Wrench
For equivalent regional tools, refer to Special Tools.
- Attach R-0007758 holding fixture (2) to the transmission.
- Attach R-0007758 holding fixture (2) with transmission to the 3-9506289 Universal Adapter (1).
- Remove the clutch release bearing (1).
- Remove the clutch fork shaft retaining bolt (2).
- Remove the clutch fork shaft (1).
- Remove the transmission control lever housing bolts (1).
- Remove the control lever housing (2) and gasket (3).
- Remove the transmission cover bolts (3).
- Remove the transmission cover (2) and gasket (1).
- Remove the back up lamp switch (1).
- Remove the transmission case bolts (3).
- Remove the transmission case (2) and gasket (1).
- Remove the case magnet (4), may stay with case.
- Remove the reverse gear shaft snap ring (6) if equipped.
- Remove the reverse idler gear washer (5), may stay on the reverse idler gear shaft.
- Mark the differential bearing adjuster and case (1) before removal.
- Remove the differential bearing adjuster lock bolt (1).
- Remove the differential bearing adjuster lock (2).
- Using S-9407198 differential bearing race wrench remove the front differential bearing adjuster (1).
- Remove the front differential bearing retainer O-ring seal (2).
- Remove the front differential carrier cover bolts (1).
- Remove the differential carrier cover (2) and gasket (3).
- Remove the front differential carrier (1).
Note:
The reverse gear shaft snap ring (6) MUST be installed even if not originally equipped to prevent shifting issues caused by incorrect assembly or parts not in position.
Transmission Disassemble (Gen 1)
Special Tools
3-9506289 Universal Adapter
R-0007758 Holding Fixture
S-9407198 Differential Bearing Race Wrench
For equivalent regional tools, refer to Special Tools.
Attach R-0 ...
Transmission General Description
The Hydra-matic 6T30/40/45/50 is a fully automatic, 6-speed, front-wheel drive,
electronic-controlled transmission. It consists primarily of a 4-element torque
converter, a compound planetary gear ...
Other materials:
Child Restraint Systems
Rear-Facing Infant Seat
A rear-facing infant seat provides restraint with the seating surface against
the back of the infant.
The harness system holds the infant in place and, in a crash, acts to keep the
infant positioned in the restraint.
Forward-Facing Child Seat
A forward-facing chil ...
Rear Wiper/Washer System Description and Operation
The rear window wiper motor is located inside the hatchback door and is directly
connected to the rear window wiper. Ignition voltage is supplied to the rear wiper
motor through the wiper switch. The hatchback rear window washer systems equipped
with a separate washer fluid pump, hose, and noz ...
Tire Rotation
In order to equalize wear, rotate the tires at the specified intervals. Also,
rotate the tire and wheel assembly whenever you notice uneven tire wear.
Radial tires tend to wear faster in the shoulder area, particularly in front
positions, due to design. Radial tires in non-drive locations may ...
0.0123