|
Callout |
Component Name |
|---|---|
|
Preliminary Procedure
Remove the turbocharger. Refer to Turbocharger Replacement. |
|
|
1 |
Turbocharger Fastener Caution: Refer to Fastener Caution. Procedure
Replace seals with NEW seals. Tighten
8 Y (71 lb in) |
|
2 |
Turbocharger Coolant Feed Pipe |
Turbocharger Cleaning and Inspection
Turbocharger Coolant Return Pipe Replacement (LUV)Engine Coolant Thermostat Housing Installation
Caution: Refer to Engine Coolant Thermostat Housing Caution.
Clean sealing surface.
Install a NEW engine coolant thermostat housing seal.
Install the engine coolant thermostat housing (2).
Caution: Refer to Fastener Caution.
Note: Screw in the 4 ...
Electronic Ignition System Description
Electronic Ignition System Operation
The electronic ignition system produces and controls the high energy secondary
spark. This spark ignites the compressed air/fuel mixture at precisely the correct
time, providing optimal performance, fuel economy, and control of exhaust emissions.
...
Fuel Tank Draining
Warning: Refer to Gasoline/Gasoline Vapors
Warning.
Note: The fuel tank must be drained with a suitable, commercially-available
fuel removal unit and suction hose - follow safety regulations and national
legislation. The fuel tank is fitted with a refill limit float valv ...