Chevrolet Sonic Repair Manual: Turbocharger Coolant Return Pipe Replacement (LUV)
|
Callout |
Component Name |
|---|---|
|
Preliminary Procedure
Remove the turbocharger. Refer to Turbocharger Replacement. |
|
|
1 |
Turbocharger Fastener Caution: Refer to Fastener Caution. Procedure
Replace seals with NEW seals. Tighten
8 Y (71 lb in) |
|
2 |
Turbocharger Coolant Return Pipe |
Turbocharger Coolant Feed Pipe Replacement (LUV)
Turbocharger Coolant Feed Pipe Replacement
Callout
Component Name
Preliminary Procedure
Remove the turbocharger. Refer to Turbo ...
Turbocharger Disassemble
Special Tool
EN-49940 Remover Quick Connector
For equivalent regional tools, refer to Special Tools.
Remove the 2 turbocharger oil return pipe bolts (2).
Remove the turbo ...
Other materials:
Front Seat Belt Buckle Replacement
Front Seat Belt Buckle Replacement
Callout
Component Name
Preliminary Procedures
Remove the front seat. Refer to Driver or Passenger Seat Removal and
Installation.
1
Driver or Passenger Seat Bel ...
Engine Oil Cooler Housing Installation
Clean the engine oil cooler housing to thermostat housing sealing surfaces.
Install 2 NEW gaskets.
h.\.\,.\\..,v:..//
Install the engine oil cooler inlet pipe (3).
Install the engine oil cooler housing (1) and the 5 engine oil cooler bolts (2)
and t ...
Input Shaft Assemble
Special Tools
J-840733 Driver
For equivalent regional tools, refer to Special Tools.
Note: Ensure the input shaft rear bearing retaining ring (2) is
placed on the input shaft before installing the input shaft rear bearing
assembly (1).
Place the input sh ...
0.0049