|
Callout |
Component Name |
|---|---|
|
Preliminary Procedure
Remove the inflatable restraint steering wheel module coil. Refer to Steering Wheel Airbag Coil Replacement. |
|
|
1 |
Turn Signal Switch Bracket Fastener (Qty: 2) Caution: Refer to Fastener Caution. |
|
2 |
Turn Signal Switch Bracket Procedure
|
Turn Signal Multifunction Switch Replacement
Wheel Alignment - Steering Wheel Angle and/or Front Toe AdjustmentParking Brake Adjustment (Disc Brake)
Note: The park brake cable adjusting nut is a nylon lock type. Use
ONLY HAND TOOLS whenever tightening or loosening the adjusting nut.
Apply and fully release the park brake several times. Verify that the park
brake lever releases completely.
Turn ON the ignition. Verify the red B ...
Automatic Transmission Flex Plate Removal
Special Tools
EN-652 Automatic Transmission Flex Plate Holder
For equivalent regional tools, refer to Special Tools.
Install the EN-652 holder (1) to hold the automatic transmission
flex plate (2).
Loosen the 6 automatic transmission flex plate bolts.
Remov ...
Input Speed Sensor Replacement
Removal Procedure
Remove the control solenoid valve and transmission
control module assembly. Refer to Control Solenoid
Valve and Transmission Control Module Assembly Replacement.
Remove the input speed sensor bolt (2) M6 x 23.
Unlock t ...