Chevrolet Sonic Repair Manual: Valve Lifter Replacement
Special Tools
EN-845 Suction Device
For equivalent regional tools, refer to Special Tools.
- Removal Procedure
-
- Remove the camshaft. Refer to Camshaft Replacement.
- Remove the valve lifter (1) use the EN-845 suction device .
Note:
Mark the assignments.
- Installation Procedure
-
- Install the valve lifter (1) use the EN-845 suction device .
- Install the camshaft. Refer to Camshaft Replacement.
Note:
Observe the correct assignment.
Note:
Coat the sliding surfaces with NEW engine oil.
Valve Lifter Removal
Special Tools
EN-845 Suction Device
For equivalent regional tools, refer to Special Tools.
Note: Mark the locations.
Remove the 16 valve lifter (1) use the EN-845 suction ...
Vehicle, Engine and Transmission ID and VIN Location, Derivative and Usage
The vehicle identification number (VIN) plate is the legal identifier of the
vehicle. The VIN plate is located on the upper left corner of the instrument panel
(I/P) and can be seen through th ...
Other materials:
Rear Compartment Sill Trim Plate Replacement
Rear Compartment Sill Trim Plate Replacement
Callout
Component Name
Preliminary Procedure
Partially remove the rear compartment opening weatherstrip. Refer to
Rear Compartment Lid Weatherstrip Replacement.
...
Crankshaft Front Oil Seal Replacement
Special Tools
EN-960 Installer
EN-45000 Remover Oil seal
For equivalent regional tools, refer to Special Tools.
Removal Procedure
Remove the crankshaft balancer. Refer to Crankshaft Balancer Replacement.
Place a drain pan underneath the front crankshaft seal area.
...
Camshaft Sprocket Installation
Install the intake camshaft sprocket (3).
Install the intake camshaft position sensor exciter wheel (2) and the intake
camshaft sprocket bolt (1), but do not tighten yet.
Install the exhaust camshaft sprocket.
Note: Tightening of camshaft sprocket bolts will ...
0.0071