Callout |
Component Name |
---|---|
Warning: Refer to Exhaust Service Warning. Warning: Refer to Safety Glasses Warning. Preliminary Procedure
Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle. |
|
1 |
Exhaust Muffler Fasteners (Qty: 2) Caution: Refer to Fastener Caution.
17 Y (13 lb ft). |
2 |
Exhaust Gasket Note: Replace with NEW gaskets |
3 |
Exhaust Front Pipe Fasteners (Qty: 2) Tighten
17 Y (13 lb ft). |
4 |
Exhaust Isolators |
5 |
Catalytic Converter |
Rear Seat Center Shoulder Belt Replacement (Sedan)
Rear Seat Center Shoulder Belt Replacement
Callout
Component Name
Preliminary Procedures
Remove the rear seat cushion. Refer to Rear Seat Cushion Removal and
Installation.
1
Rear Seat Center Sho ...
Intake Manifold Cleaning and Inspection
Clean the intake manifold mating surfaces.
Inspect the intake manifold (2) for damage.
Inspect the intake manifold for cracks near metallic inserts.
Inspect the crankcase ventilation passages in the intake manifold face for
blockage.
Warning: Wear safety glasses in or ...
Camshaft Timing Chain Installation
Special Tools
EN-952 Fixing Pin
EN-953-A Fixing Tool
EN-955-10 Fixing Pin from EN-955 Kit
For equivalent regional tools, refer to Special Tools.
The engine should be adjusted to TDC.
The crankshaft should be locked with EN-952 fixing pin.
The camshaft should be locked with EN-9 ...