Chevrolet Sonic Repair Manual: Water Pump Pulley Replacement (LUV)
- Removal Procedure
-
- Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement.
- Remove the engine mount bracket. Refer to Engine Mount Bracket Replacement - Right Side.
- Remove the drive belt. Refer to Drive Belt Replacement.
- Loosen the 3 water pump pulley bolts (2) while holding the water pump pulley hub with a wrench.
- Remove the 3 water pump pulley bolts (2).
- Remove the water pump pulley (1).
- Installation Procedure
-
- Install the water pump pulley (1).
- Install the 3 water pump pulley bolts (2).
- Tighten the 3 water pump pulley bolts to 22 Y (16 lb ft)
while holding the water pump pulley hub with a wrench.
- Install the drive belt. Refer to Drive Belt Replacement.
- Install the engine mount bracket. Refer to Engine Mount Bracket Replacement - Right Side.
- Install the air cleaner assembly. Refer to Air Cleaner Assembly Replacement.
Caution:
Refer to Fastener Caution.
Water Pump Pulley Removal
Loosen the 3 water pump pulley bolts (2) while holding up the water pump
pulley hub with a wrench.
Remove the 3 water pump pulley bolts (2).
Remove the water ...
Water Pump Pulley Replacement (LUW)
Removal Procedure
Remove the air cleaner housing. Refer to Air Cleaner Assembly Replacement.
Support the engine with a suitable jack.
Remove the engine mount. Refer to En ...
Other materials:
Drivetrain and Front Suspension Frame Replacement
Special Tools
EN-45059 Angle Meter
For equivalent regional tools, refer to Special Tools.
Removal Procedure
Support the radiator and condenser from above using the upper brackets
on each side.
Raise the vehicle on a hoist. Refer to Lifting and Jacking the Vehicle.
Re ...
Automatic Transmission Shift Lock Control Function Check
Warning: When you are doing this inspection, the vehicle could move
suddenly. If the vehicle moves, you or others could be injured.
Before starting this check, be sure there is enough room
around the vehicle. It should be parked on a level surface.
Apply the parking brake. Be read ...
Selector and Shift Lever Cable Bracket Replacement
Removal Procedure
Remove the battery tray. Refer to
Battery Tray Replacement.
Disconnect the shift lever and selector lever cable
end (1) from the transmission shift lever and selector lever.
Pull the cable retainers (2) to release the shift
le ...
0.0081