Chevrolet Sonic manuals

Chevrolet Sonic Repair Manual: Windshield Side Garnish Molding Replacement

Chevrolet Sonic Repair Manual / Body / Body Interior / Trim Panels/Welts / Windshield Side Garnish Molding Replacement



Windshield Side Garnish Molding Replacement

Callout

Component Name

Preliminary Procedures

Disable the SIR system, if equipped. Refer to SIR Disabling and Enabling.

1

Windshield Side Garnish Molding Assembly

Procedure

  1. Tabs must be installed prior to retainers.
  2. Tabs to be fully seated in the instrument panel (I/P) trim panel retainer and valance panel.
  3. Disconnect the electrical connectors.
  4. Ensure the tether is reattached when installed.
Roof Rail Rear Assist Handle Replacement
Roof Rail Rear Assist Handle Replacement Callout Component Name 1 Roof Rail Rear Assist Handle Fastener (Qty:?€‰2) ...

Mirrors
...

Other materials:

Hood Hinge Replacement
Hood Hinge Replacement Callout Component Name Preliminary Procedures Remove the hood. Refer to Hood Replacement. Remove the front fender. Refer to Front Fender Replacement. 1 Hood Hinge Bolt (Q ...

Transmission Fluid Cooler Hose/Pipe Quick-Connect Fitting Disconnection and Connection
Removal Procedure Note: Perform the following procedure when removing the retaining rings and cooler lines from the quick connect fittings located on the radiator and/or the transmission. Pull the plastic cap back from the quick connect fitting and dow ...

Transmission Rear Mount Replacement
Removal Procedure Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle. Remove and DISCARD the rear transmission mount bracket to rear mount through bolt (1). Remove rear transmission mount to frame bolt (3). Push and hold ...

© 2014-2026 Copyright www.csmans.com
 
0.0066