Chevrolet Sonic Repair Manual: Windshield Upper Reveal Molding Replacement

Chevrolet Sonic Repair Manual / Body / Glass & Windows / Windshield / Windshield Upper Reveal Molding Replacement

Windshield Upper Reveal Molding Replacement
Callout	Component Name
Preliminary Procedures Remove the windshield to replace the reveal molding. Refer to Windshield Replacement.
1	Windshield Reveal Molding Warning: Refer to Glass and Sheet Metal Handling Warning. Procedure Mark the window at both ends before remove the reveal molding for installing. Place the window on a clean and dry surface. Use a suitable plastic tool, use care when releasing the reveal molding not to pry on the window. Clean around the edges and surface of the window and molding with a 50/50 mixture of isopropyl alcohol and water by volume on a dampened lint free cloth.

Windshield Side Garnish Molding Replacement

Windshield Side Garnish Molding Replacement Callout Component Name Preliminary Procedures Disable the SIR system, if equipped. ...

Driver Info & Control

...

Other materials:

Brake Rotor Assembled Lateral Runout Measurement
Special Tools CH-41013 Rotor Surfacing Kit CH-42450-A Wheel Hub Resurfacing Kit CH-45101 Hub and Wheel Runout Gauge CH-45101-100 Conical Brake Rotor Washers For equivalent regional tools, refer to Special Tools. Warning: Refer to Brake Dust Warning. Note: B ...

Wheel Alignment - Steering Wheel Angle and/or Front Toe Adjustment
Ensure that the steering wheel is set in a straight ahead position. Loosen the tie rod jam nut (1). Adjust the toe to specification by turning the inner tie rod (2). Refer to Wheel Alignment Specifications. Caution: Refer to Fastener Caution. Tighten the t ...

Drive Range, First Gear Engine Braking (Gen 1)
When the gear selector lever is moved to the Drive (D) range from the Neutral (N) position, the transmission will provide engine braking. In this operating range, the normally-low 1234 pressure control solenoid 5 is commanded ON and, in the engine braking mode, the following changes occur with ...

0.0046