Chevrolet Sonic Repair Manual: Windshield Washer Solvent Container Filler Tube Replacement

Chevrolet Sonic Repair Manual / Body / Wipers, Washers / Washer Fluid System / Windshield Washer Solvent Container Filler Tube Replacement

Windshield Washer Solvent Container Filler Tube Replacement
Callout	Component Name
Preliminary Procedure Open and support the hood assembly. Grasp the top portion of the windshield washer container filler tube and rotate the tube 1/8 turn counterclockwise to unlock from the windshield washer solvent container lock tabs. Pull the tube straight from the windshield washer solvent container. Inspect and/or replace the seal on the windshield washer container filler tube if damaged.
1	Windshield Washer Solvent Container Filler Tube Procedure Inspect the seal on the filler tube, replace as needed. Remove and transfer the windshield washer solvent container cap. Upon installation of the windshield washer solvent container filler tube back into the windshield washer solvent container, ensure to twist the filler tube 1/8 turn clockwise and lock the filler tube into the container lock tabs.

Thrust Washer and Bearing Cleaning and Inspection

Warning: Wear safety glasses to avoid injury when using compressed air or any cleaning solvent. Bodily injury may occur if fumes are inhaled or if skin is exposed to chemicals. ...

Windshield Washer Solvent Container Hose Replacement

Windshield Washer Solvent Container Hose Replacement Callout Component Name Preliminary Procedure Remove the left front wheelho ...

Other materials:

Engine Heater
The engine heater can provide easier starting and better fuel economy during engine warm-up in cold weather conditions at or below −18°C (0°F). Vehicles with an engine heater should be plugged in at least four hours before starting. 1. Turn off the engine. 2. Open the hood and unwrap ...

Engine Front Cover Gasket Installation
Clean the sealing surfaces and remove all remains of old sealing compound material. Note: The thickness of the sealing bead should be 2 mm (0.0787 in). Apply sealing compound to the shown areas (1) and (2). Refer to Adhesives, Fluids ...

Oil Pump Replacement
Removal Procedure Remove the engine front cover. Refer to Engine Front Cover with Oil Pump Replacement. Remove the 8 oil pump cover bolts (1). Remove the oil pump cover (2). Warning: Before removing the spring, cover the spring with ...

0.007