Chevrolet Sonic Repair Manual: Brake Pressure Modulator Valve Bracket Replacement
- Removal Procedure
-
- Remove the brake pressure modulator valve (BPMV) and bracket assembly. Refer to Brake Pressure Modulator Valve Replacement.
- Remove the BPMV bolts (1).
- Remove the BPMV bracket.
- Installation Procedure
-
- Install the BPMV bracket to the BPMV.
- Install the BPMV bolts (1) and tighten to 11 Y (97 lb in)
.
- Install the BPMV and bracket assembly. Refer to Brake Pressure Modulator Valve Replacement.
Caution:
Refer to Fastener Caution.
Antilock Brake System Automated Bleed
Warning: Refer to Brake Fluid Irritant Warning.
Caution: Refer to Brake Fluid Effects on Paint and Electrical Components
Caution.
Note: Before performing the Antilock Brake System ...
Brake Pressure Modulator Valve Replacement
Removal Procedure
Warning: Refer to Brake Fluid Irritant Warning.
Caution: Refer to Brake Fluid Effects on Paint and Electrical
Components Caution.
Caution: Always ...
Other materials:
Certification Label
Label Example
A vehicle-specific Certification label is attached to the vehicle's center pillar
(B-pillar). The label tells the gross weight capacity of the vehicle, called the
Gross Vehicle Weight Rating (GVWR). The GVWR includes the weight of the vehicle,
all occupants, fuel, and carg ...
Power Door Locks Description and Operation
Door Lock System Components
The power door lock system consists of the following components:
Driver door lock switch
Child door lockout switch
Door lock actuators in each of the doors
Body control module (BCM)
Underhood fuse block (Contains door lock PCB relay)
...
Ignition Coil Replacement
Special Tools
EN-6009 Remover and Installer Ignition Coil
For equivalent regional tools, refer to Special Tools.
Removal Procedure
Remove the engine wiring harness guide (1) from the
cylinder head.
Disconnect the ignition coil electrical connector (2).
...
0.006