Chevrolet Sonic Owner's Manual: Call Waiting
Call waiting must be supported on the Bluetooth phone and enabled by the wireless service carrier to work.
Accepting a Call
Turn the Push/MENU/TUNE knob to “Answer” and press the Push/ MENU/TUNE knob to accept the call.
Declining a Call
Turn the Push/MENU/TUNE knob to “Decline” and press the Push/ MENU/TUNE knob to decline the call.
Switching Between Calls (Call Waiting Calls Only)
To switch between calls:
1. Turn or press the Push/MENU/ TUNE knob.
2. Select Switch Call from the menu.
Accepting or Declining a Call
When an incoming call is received, the infotainment system mutes and a ring tone
is heard in the vehicle.
Accepting a Call
Turn the Push/MENU/TUNE knob to “Answer” and press the Push/ MENU/TUN ...
Conference Calling
Conference calling and three-way calling must be supported on the Bluetooth phone
and enabled by the wireless service carrier to work.
To start a conference while in a current call:
1. Turn or pre ...
Other materials:
Drivetrain and Front Suspension Frame Replacement
Special Tools
EN-45059 Angle Meter
For equivalent regional tools, refer to Special Tools.
Removal Procedure
Support the radiator and condenser from above using the upper brackets
on each side.
Raise the vehicle on a hoist. Refer to Lifting and Jacking the Vehicle.
Re ...
Tire and Wheel Assembly Runout Measurement - On-Vehicle
Raise and support the vehicle.
Closely inspect each tire for proper and even bead seating.
If any of the tire beads were not properly or evenly seated, reseat the
tire bead, then proceed to step 4. Refer to Tire and Wheel Removal and Installation.
Wrap the circumferenc ...
Engine Component Description
Cylinder Block
The cylinder hollow frame structured in–line 4 cylinder. The block has 5 crankshaft
bearings with the thrust bearing located on the third bearing from the front
of the engine.
Crankshaft
The crankshaft is a steel crankshaft. It is supported ...
0.0056