|
Callout |
Component Name |
|---|---|
|
Warning: Refer to Exhaust Service Warning. |
|
|
1 |
Catalytic Converter Heat Shield Fasteners (Qty: 4) Caution: Refer to Fastener Caution.
9 Y (80 lb in). |
|
2 |
Catalytic Converter Heat Shield |
Exhaust System Replacement
Exhaust Heat Shield ReplacementUsing the Tire Sealant and Compressor Kit to Temporarily Seal and Inflate a
Punctured Tire
When using the tire sealant and compressor kit during cold temperatures, warm
the kit in a heated environment for five minutes. This will help to inflate the
tire faster.
If a tire goes flat, avoid further tire and wheel damage by driving slowly to
a level place. Turn on the hazard warning fl ...
Timing Belt Installation
Special Tools
EN-6333 Locking Pin
EN-6340 Locking Tool
For equivalent regional tools, refer to Special Tools.
Note: The timing belt drive gear and oil pump housing must align.
Turn the crankshaft in the direction of engine rotation, by the crankshaft
balancer bolt ...
Control Valve Body Cover Replacement
Removal Procedure
Disconnect the battery negative cable. Refer to
Battery Negative Cable Disconnection and Connection.
Raise and support the vehicle. Refer to
Lifting and Jacking the Vehicle.
Remove the front bumper fascia opening lower cover.
Refer to Front Bumper ...