Chevrolet Sonic manuals

Chevrolet Sonic Repair Manual: Evaporative Emission Canister Vent Solenoid Valve Replacement

Chevrolet Sonic Repair Manual / Powertrain / Internal Combustion Powertrain Control / Engine Control / General / Evaporative Emission Canister Vent Solenoid Valve Replacement



Evaporative Emission Canister Vent Solenoid Valve Replacement

Callout

Component Name

Preliminary Procedures

  1. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection.
  2. Remove the evaporative emissions canister. Refer to Evaporative Emission Canister Replacement.

1

Evaporative Emissions Canister Vent Solenoid Valve

Procedure

Turn the evaporative emission canister vent solenoid valve counter clockwise 45 degrees and remove the solenoid from the evaporative emissions canister.

Evaporative Emission Canister Replacement (Steel Tank)
Removal Procedure Remove the evaporative emission canister bracket fasteners (1). Disconnect the purge solenoid valve electrical connector (1). Disconn ...

Evaporative Emission Control System Description
Typical Evaporative Emission (EVAP) System Hose Routing Diagram (1) Evaporative Emissions (EVAP) Purge Solenoid Valve (2) EVAP Canister ...

Other materials:

Customer Assistance Office
Chevrolet encourages customers to call the toll-free number for assistance. However, if a customer wishes to write or e-mail Chevrolet, the letter should be addressed to: United States and Puerto Rico Chevrolet Motor Division Chevrolet Customer Assistance Center P.O. Box 33170 Detroit, MI 4 ...

Driver or Passenger Seat Back Cover and Pad Replacement
Driver or Passenger Seat Back Cover and Pad Replacement Callout Component Name Warning: Refer to SIR Warning. Warning: Do not repair or replace the seat stitching or seams in the seat back trim cover with an ...

Tire and Wheel Assembly-to-Hub/Axle Flange Match-Mounting
Note: After remounting a tire and wheel assembly to a hub/axle flange, remeasure the tire and wheel assembly on-vehicle runout in order to verify that the amount of runout has been reduced and brought to within tolerances. Mark the location of the high spot on the tire and wheel asse ...

В© 2014-2020 Copyright www.csmans.com
   
0.0284