Chevrolet Sonic manuals

Chevrolet Sonic Repair Manual: Front Side Door Weatherstrip Replacement - Body Side

Chevrolet Sonic Repair Manual / Body / Body Exterior / Panels / Front Side Door Weatherstrip Replacement - Body Side



Front Side Door Weatherstrip Replacement - Body Side

Callout

Component Name

Preliminary Procedures

  1. Remove the upper center pillar trim. Refer to Center Pillar Upper Trim Panel Replacement.
  2. Remove the lower center pillar trim. Refer to Center Pillar Lower Trim Panel Replacement
  3. Remove the carpet retainer. Refer to Front Side Door Opening Floor Carpet Retainer Replacement.

1

Front Side Door Weatherstrip Body Side

Procedure

  1. Starting in the center bottom of the weatherstrip, pull the weatherstrip upward and away from the pinch-weld flange.
  2. Start in the center bottom of the pinch-weld flange.
  3. Ensure that the weatherstrip and retainers are fully seated on the flange before installing the front carpet retainer.
  4. Inspect the door for proper operation.
Front Side Door Upper Hinge and Lower Hinge Replacement
Front Side Door Upper Hinge and Lower Hinge Replacement Callout Component Name 1 Front Side Door Upper Hinge to Body Bol ...

Front Side Door Weatherstrip Replacement - Door Side
Front Side Door Weatherstrip Replacement - Door Side Callout Component Name 1 Front Side Door Weatherstrip Upper Retaine ...

Other materials:

Fuses and Circuit Breakers
The wiring circuits in the vehicle are protected from short circuits by a combination of fuses, circuit breakers, and fusible thermal links. This greatly reduces the chance of fires caused by electrical problems. Look at the silver-colored band inside the fuse. If the band is broken or melted, ...

Rear Side Door Outer Panel Replacement
Removal Procedure Warning: Refer to Glass and Sheet Metal Handling Warning. Note: According to different corrosion warranties, only the regional mandatory joining methods are allowed. Disable the SIR System. Refer to SIR Disabling and Enabling. Dis ...

Turbocharger Installation
Special Tool EN-49942 Holding Wrench For equivalent regional tools, refer to Special Tools. Clean the sealing surfaces. Replace the connect fittings on the turbocharger coolant feed pipe and the turbocharger coolant return pipe. Refer to Turbocharger Disassemble and Turbocharger Ass ...

В© 2014-2021 Copyright www.csmans.com
   
0.0199